Proway Liquid Nail
The Proway Liquid Nail adhesive is a single-component, paintable sealant based on silane-modified polymer. This product does not contain solvents and can replace solvent-based adhesives, causing no pollution to the environment. At the same time, it can produce superior adhesion on most building materials without the need for primer, allowing for nail-free, hole-free, and undamaged substrates.
Product Application
[1] Suitable for bonding stairs, steps, skirting boards, dado rails, gypsum lines, and various types of stone; [2] Suitable for indoor and outdoor applications on various absorbent and non-absorbent materials such as wood, ceramics, metal, stainless steel, and concrete; [3] Suitable for bonding mirrors, handles, crystal panels, and marble; [4] Suitable for bonding and fixing various types of calligraphy, signs, acrylic, PVC, and other materials; [5] Suitable for DIY home use.
Product Features
[1] Solvent-free, ultra-low VOC, non-toxic, non-irritating, and odorless, causing no pollution; [2] Excellent initial adhesion allows for immediate positioning; [3] Great thixotropy and extrusion, with a wide application temperature range; [4] Excellent adhesive performance on most building materials such as stone, aluminum, ceramics, and stainless steel; non-polluting for porous materials; [5] Outstanding weather resistance, water resistance, and strong tensile and compression recovery capabilities.
Physical Properties
Appearance: Uniform paste, no impurities or particles Density (20℃, g/cm³): 1.54±0.02, GB/T13477.2 Curing Method: Moisture cure Skin-over Time min (23℃, RH50%): 10-30, GB/T13477.5 Curing Speed (mm/24h): ≥3.5 Shore A Hardness: 55, GB/T531 Tensile Strength PSI: 275, GB/T528 Elongation at Break %: ≥300, GB/T528 Shear Strength PSI: 362, GB/T7124-2008 Flowability (mm): Non-sagging, GB/T13477.6 Pollution: Non-polluting, JC/T881 Appendix A
Usage Limitation
[1] Cannot be used as a structural sealant for curtain wall projects; [2] Cannot be used for sealing joints between window frames and glass during door and window processing; [3] When bonding glass, ensure the adhesive surface is not exposed to sunlight; [4] Not suitable for materials that may exude oil, plasticizers, or solvents, such as oil-soaked wood surfaces; [5] Not suitable for construction when the material surface temperature is below 4°C or above 40°C.
Color
The adhesive is available in three standard colors: black, white, and gray. Other colors can be provided according to customer requirements.
Packaging
The adhesive is available in net capacity of 300mL hard tubes, as well as 10ml, 50ml, and 90ml toothpaste tubes.
Storage
Store the adhesive in its original packaging in a dry, well-ventilated environment at 27℃ or lower. From the date of production, the shelf life is 9 months.
Safety Guidelines
Uncured sealant should not be in prolonged contact with skin. If the sealant accidentally enters the eyes, immediately rinse with a large amount of water and seek medical attention. When considering using any products from our company for a specific application, please first review our latest Material Safety Data Sheet (MSDS) and ensure safe use within the expected range. For MSDS and other safety information about our products, please contact our company. When handling any products mentioned in this text, please refer to the latest relevant product safety information and take necessary measures to ensure safe use.
See More Products
Copyright © 2021 Proway Performance Materials, LLC. All rights reserved.
Company